AD 013 can be applied using spray, brush or roller. It is ready to use and a maximum addition of 10% water is allowed for mechanical working to achieve
a good spray consistency. Before use, any settled quartz sand should be mixed in by stirring. Subsequent plasters or tile adhesives should only be applied once the coating is fully dry. Check dryness with a scratch test before covering. AD 013 cannot be worked at substrate temperatures below +5°C. When AD 013 is applied as a plaster contact layer on shower walls, minimum 2 coats are required. Apply the 2nd coat when the first coat has fully dried after about 2 hours depending on the surrounding temperature and humidity.