AD SST 150
System Sealing Tape
Description
AD System Sealing Tape 150 is a diagonally elastic sealing tape suitable for sealing of joints, cracks and pipe tracks. The edges and joints are subsequently fully covered with the sealant (e.g. AD 019, AD P500 HB, AD 011 & AD012).
Product Properties
- highly elastic
- for interior and exterior use
- highly tear-proof
- highly chemical resistance
- tested for water impact
- for wet rooms
Area of Application
- AD System Sealing Tape 150 is a diagonally elastic sealing tape suitable for sealing of joints, cracks and pipe tracks. The elastic sealing tape is designed and produced for use in wet and permanent wet areas such as baths, showers, toilets, kitchens, etc. Suitable substrates are concrete, fully pointed brickwork, plasters or mortar, lightweight concrete, wall and gypsum panels, construction panels, cement and mastic asphalt plasters.
Substrate preparation
The substrate must be frost-free and stable, free of grease, paint, separating agents and loose particles. After application of the sealing tape allow to cure for 2-3 hours, prior to receive the second layer.
Application
AD System Sealing Tape 150 is inserted into the fresh sealing layer. The edges and joints are subsequently fully covered with the sealant (e.g. AD 018 HT, AD 019, AD P500 HB, AD 011 & AD012). It is advisable to insert AD System Sealing Tape 150 in loop-form into the joint to be bridged.
Consumption
- Depending on application
Packaging
- 10 m roll x 12 cm wide
- 50 m roll x 12 cm wide
Storage & Material base
- Keep cool and dry
- Rubber with continuous mesh
Technical Data
- Diffusion resistance number : - 69,000 μ
- Tear strength : 180N/cm
- Bending ability (cold)
- Temperature resistance : ~35 to + 100°C
Video
Media Gallery
